A subwoofer is a speaker that is designed to replicate low frequencies. Subs typically run at a frequency of 20-200 Hz. In this post, we have listed the best sq subwoofers.
Subwoofers will produce deeper tones in the numerically lower range, but they will lack lower-midrange sound.
The best subwoofers are considered Professional Quality when they work below 100 Hz. The majority of home and car audio subwoofers run at frequencies higher than 100Hz.
A part subwoofer will give your music a level of strength and sound that other speakers can’t match.
It’s one of the essential components of a well-rounded car stereo system. When you instal one of the best car subwoofers into your stereo, you’ll wonder how you ever got by without one.
Today’s car subwoofers must be efficient to manage low frequencies.
They usually are, but not always, mounted in the car’s boot or trunk, facing the back seat, and serve as part of the vehicle’s entertainment system.
Many drivers consider deep, booming bass from their car’s sound system to be necessary.
You’ll need a good sub to make sure you can hear the basslines in your favourite songs clearly and loudly.
Fortunately, we’ve compiled this list of the best car subwoofers so you can nod along to your favourite tunes while driving.
9 Best SQ Subwoofers
- 1. Alpine Type R 12
- 2. JBL CT-Bass Pro12
- 3. MTX TNE212DV
- 4. Rockford Fosgate P300
- 5. MTX Audio Terminator Series
- 6. Orion HCCA12
- 7. Kicker 44DCWC122
- 8. Kenwood KSC-SW11
- 9. JBL BassPro Subwoofer System
1. Alpine Type R 12
What We Like
- Magnet Weight: 127oz
- Power Handling: 750W RMS
- Power Range: 500W-750W RMS
What Is Missing
- Needs to be fitted in an enclosed cabinet
2. JBL CT-BassPro12
What We Like
- Progressive spider
- Remote level control
- Built-in 150-watt amplifier
What Is Missing
- None
3. MTX TNE212DV
What We Like
- Cooling system
- Easy installation process
- Aviation Carpet for better performance
What Is Missing
- None
1. Alpine Type R 12
Alpine Type R 12
We think you’ll get most people’s attention with an RMS rating of 250-750 watts and a peak level of 2250.
This is a 12-inch subwoofer with dual voice coils pumping out that kind of volume.
The pulp cone is Kevlar-reinforced and comes with a rubber-based surround. Any excessive vibrations encountered at high volumes would be reduced as a result of this.
It has a Poly-mica dust cover, and the speaker has a durable and rugged cast aluminium frame.
Besides, A dual flow vent provides excellent ventilation for cooling.
Given that it is not delivered in a cabinet, it is a tangible item. It measures 14.5 by 14.5 by 9 inches and weighs over 26 pounds.
The Alpine subwoofer will need a 6.375-inch mounting diameter.
Moreover, it is a low, violent bass sound that necessitates using the powerful amp we described earlier.
However, to get the most out of this subwoofer, the amplifier should be about 1000 watts.
Whack in the back is what you’ll get from this subwoofer when it’s at its best. That’s how strong it is.
The Alpine subwoofer will need a solid amplifier to power it. It also depends on the kind of sound you’re looking for from this subwoofer.
This might not be the sound for you if you want a noisy sound with a soft bass.
If you want to put this Alpine subwoofer in a cabinet, you’ll probably need to have one made. Enclosure sizes for ported and sealed enclosures are recommended.
Overall, It is one of the strongest car subwoofers for the money at its price point.
Pros
- Powerful
- Well built
- Magnet Weight: 127oz
- Power Handling: 750W RMS
- Power Range: 500W-750W RMS
Cons
- Needs to be fitted in an enclosed cabinet
2. JBL CT-BassPro12
JBL CT-BassPro12
When it comes to audio equipment, JBL is one of the most well-known brands.
Its popularity stems from its ability to provide high-performance gear at an affordable price, precisely what this subwoofer offers.
It’s housed in a well-designed enclosure that helps to amplify the beautiful bass it produces. It has a Slipstream port and is a reflex enclosure.
A polypropylene cone with a rubber surround provides resonance dampening in this 12″ sub.
Besides, the oversized, dual-stacked magnets increase the magnetic flux.
The patented GT Bass Progressive Spider controls the cone’s motion, allowing for high excursion performance.
Subwoofer coils can overheat, as you’re probably aware, especially when they’ve been blasting out basslines at a high volume for hours.
JBL has addressed this issue by adding a vented pole piece, which allows for improved power handling and virtually eliminates the possibility of the speaker overheating.
On top of all of these fantastic features, it has an in-built amplifier with an RMS power of 150 watts and a peak power of 45 watts.
It has a remote control that allows you to change the volume even when driving. Above all, the sound quality is incredible.
Pros
- Great sound
- Won’t overheat
- Progressive spider
- Remote level control
- Built-in 150-watt amplifier
- Oversize, dual-stacked magnets
Cons
- None
3. MTX TNE212DV
MTX TNE212DV
Key Highlights
- Cooling system
- Easy installation process
- Aviation Carpet for better performance
The next item on our list is a loaded car subwoofer sound system from MTX.
It’s simple to set up because it’s enclosed in a high-quality enclosure that allows you to put it in your trunk, behind your seat, or just about anywhere else in your car for maximum bass.
Additionally, each speaker can handle 500 watts RMS, with 1000 watts RMS at 2000 watt peaks.
For additional longevity, they have polypropylene dust caps. They’re also surprisingly light.
They have a mechanical cooling processor known as ‘Spider Plateau Venting.’ To compensate for heat build-up, this processor refreshes the air intake around the coil.
Besides, the cooling system is the standout feature of this outstanding MTX subwoofer.
It’s powerful, and it means you’ll never have to worry about the sub overheating, even on a long drive with the bass turned up.
This device is also simple to install, and we believe the price is fair. In our view, this is a secure, long-term investment.
Pros
- Cooling system
- Using 5/8 inch MDF
- Easy installation process
- Dual 12 inch vented Subwoofer Enclosure
- Aviation Carpet for better performance
Cons
- None
4. Rockford Fosgate P300
Rockford Fosgate P300
This wedge-shaped speaker cabinet is made of 5/8″ MDF fiberboard and measures 15 by 20 by 11 inches.
The architecture allows it to fit in most spaces, with its most extensive depth of 11 inches.
An industrial vinyl has been used to cover the cabinet. It is a self-contained, fully functional structure.
Additionally, all is pre-installed. It has a powerful amplifier with a peak power of 600 watts and an RMS power of 300 watts.
A Punch, 12-inch subwoofer provides the foundation for this massive sound. The cone is made of paper pulp and reinforced with Kevlar.
A two-inch voice coil and a frequency response of 35-150Hz are included.
It has a remote bass level control and a built-in bass EQ.
The low pass crossover at 12dB/Octave is customizable, enabling you to pass through the frequencies you like.
Besides, A closed-loop design is used to achieve the highest degree of efficiency.
This means that the speaker and amplifier within the enclosure are in sync.
An automatic off/on function is one of the more fascinating extra features.
The remote bass level control has already been listed, but there is also a separate gain and bass boost.
It’s a rugged, well-built unit that weighs in at 30 pounds, making it very heavy for a typical vehicle.
Overall, the cost is within reason. It’s powerful and well-equipped, so it’s not only one of the best car subwoofers but also one of the best under-seat subwoofers available.
Pros
- Well built
- Large AWG input terminals
- Built-in adjustable bass boost EQ
- Intelligent auto turn on/off function
- Covered with industrial heat activated vinyl
Cons
- Small cabinet
5. MTX Audio Terminator Series TNE212D
MTX Audio Terminator
Key Highlights
- Polypropylene Cone
- Frequency response: 37-150 Hz
- Internally wired to a 2-ohm final load
This could be the subwoofer for you if you’re looking for a subwoofer that will alter the sound in your car.
This subwoofer is large and heavy, and it may be one of the highest-quality car subwoofers available.
With a 5/8″ thick MDF casing and aircraft-grade carpet, they’re made to last.
As a result, it is designed to withstand all of the bumps and shakes you’ll encounter in a car’s boot or trunk.
Unless you lay it on the back seat, this is not the kind of subwoofer that fits inside the vehicle. It is massive, measuring 14 by 29 by 13 inches.
It’s also very high, weighing in at 30 pounds.
A subwoofer isn’t purchased to make the car look better or to lower the suspension – it’s purchased for the sound.
You’re looking for something to liven up the sound of your car stereo, which might be a little dull.
That is unquestionably going to happen. The power alone can push it up a notch, but the sound quality is excellent.
It produces a deep, throbbing bass that can be overpowering at times.
Its frequency response ranges from 10Hz to 150Hz. Two 12-inch subwoofers are housed within the cabinet.
Each speaker has an RMS power rating of 200 watts. A two-inch aluminium voice coil is used in the woofer.
Moreover, to cushion any unexpected movements, the speakers are fitted with a rubber surround.
This is a solid subwoofer at an affordable price. It’s built tough, but grilles don’t protect the speakers.
Overall, It’s made by MTX Audio, which is unquestionably one of the best car subwoofer manufacturers.
Pros
- Rubber Surround
- 1200W Max Power
- Polypropylene Cone
- 5/8 inch MDF Construction
- Frequency response: 37-150 Hz
- Internally wired to a 2-ohm final load
Cons
- Lacks grills
6. Orion HCCA12
Orion HCCA12
With 2500 RMS, 5000 watts of power. For a car subwoofer, that’s a lot of volumes. It’s not only strong, but it also sounds good.
It has a fantastic bass sound. It has excellent audio quality, which is crisp and straightforward.
A new cooling system for the voice coil contributes to the sound quality.
This new device aids in temperature control while maintaining consistent audio. The bass is very quiet.
The rubber surround on the 12″ speaker allows for some movement. The subwoofer also consumes some of the beast’s undesirable excess capacity.
The Orion subwoofer has a polypropylene cone that is very long-lasting.
Moreover, It is designed to fit into a room in your car’s boot or trunk.
The subwoofer will need a six-inch diameter, and the speaker measures 12 by 12.5 by 6.5 inches deep and weighs a whopping 68 pounds.
Some car subwoofers, like this one, are designed to be mounted in the vehicle. Some people, on the other hand, want the woofer but in a package.
This is probable, but getting one made is recommended. Either enclosed or ported is perfect, but it will require a sturdy construction using wood and screws rather than glue.
You’ll find parts of your new cabinet all over the floor if the construction is done incorrectly.
Given the middle-level price point, you are getting compelling speakers for the price.
Pros
- Powerful sound
- Mid range pricing
- Dual 1 Ohm Voice Coil
Cons
- Needs to be fitted
7. Kicker Car Audio Subwoofer
Kicker Subwoofer
Key Highlights
- 98.4 dB sensitivity
- Heavy MDF construction
- Deluxe high quality fuse holder
This subwoofer is integrated into a sturdy cabinet that also houses two speakers. MDF fiberboard was used in the cabinet’s construction.
Anti-vibration and reinforcing bracing can be used on the box’s insides.
The box’s corners are rounded for a pleasing appearance, and the device is finished with a long-lasting grey carpet.
It’s a ported box with slots on the sides and back. It’s a relatively large unit, measuring approximately 36 by 24 by 18 inches and weighing in at over 60 pounds.
Two 12-inch speakers with a 600-watt RMS rating are housed in the cabinet.
The maximum power output is 1200 watts. The cones are made of polypropylene and have a polyurethane stabilising surround to minimise distortion.
It’s a potentially powerful setup, but the amplifier provided degrades its efficiency.
Since it is underpowered, you will not be able to profit from the strong speakers.
It’s a decent speaker system for the price. It’s a well-crafted and appealing style.
It is, however, extensive and heavy, so make sure it will suit. However, as previously said, it is let down by its amplifier.
Pros
- Value for money
- 98.4 dB sensitivity
- Heavy MDF construction
- Deluxe high quality fuse holder
Cons
- Underwhelming amplifier
8. Kenwood KSC-SW11
Kenwood Subwoofer
Key Highlights
- Aluminum enclosure
- Compact powered subwoofer
- Line(RCA) + speaker level input
Kenwood is a well-known manufacturer of high-quality audio equipment.
Kenwood is a company that was founded in 1946. It was renamed Trio in 1960, another brand famous for audio quality, but was later renamed Kenwood.
In 2008, it merged with another audio behemoth, JVC. The SW11 is a simple concept with no flashing lights or pomp and circumstance.
Additionally, It’s thin, measuring 16.2 by 9.8 by 4.2 inches and weighing just ten pounds. As a result, it can comfortably fit under a seat or in the trunk or trunk of a vehicle.
The Kenwood subwoofer is driven and comes with remote control, so you don’t need an external amp. It has an 8.25 by 5.15-inch woofer with a distinctive shape.
Besides, there are three controls on the unit: one for crossover and two for volume. A phase switch is also present.
It can deliver 150 watts RMS, which is very good for an under-seat subwoofer. The bottom end and some of the lower mids will be lifted, but that is it.
Moreover, The Kenwood subwoofer is excellent if that’s what you want. It’s probably not for you if you’re looking for tall, deep bass.
Overall, the Kenwood subwoofer is a decent buy at this price point, and it might be the best small space car subwoofer.
Pros
- Noise-less sound
- Value for money
- Aluminum Die-cast frame
- Compact powered subwoofer
- Line(RCA) + speaker level input
Cons
- Underwhelming bass
9. JBL BassPro Micro Dockable Powered Subwoofer System
JBL BassPro Subwoofer
For those who want to save a little room, there’s another tiny subwoofer. And this one is skinny.
It’s made of plastic and measures 7 by 16 by 10 inches, weighing just 18 pounds.
The JBL subwoofer has an 8-inch woofer with a built-in Class D amp and can produce up to 140 watts RMS.
Also, It’s equipped with RCA adapters, allowing you to link a number of these subwoofers together.
Besides, the JBL subwoofer has a sturdy fabric over the grille and a sleek style with a black finish and chrome trim. It does have an intriguing kind.
Additionally, the amplifier serves as the foundation for the subwoofer, which is permanently mounted. If necessary, the BassPro Micro can also be easily detached.
Unclip it if you need more space. It’s a clever and practical concept.
It should fit inside most vehicles with the amp as the central fixing point. The woofer is removable due to its small size, which is also convenient.
Moreover, the downside is that the size of the box can restrict the bass’s range and scope. Bass needs a certain amount of space to work, and smaller sizes result in a loss of depth.
It is, however, a good idea to have a detachable subwoofer, even though the strength of its bass reproduction would not win any awards.
Overall, it is not a cost-effective price; in reality, it is very costly for what it is. The build quality is JBL, but there isn’t a tonne of JBL bass.
Pros
- Cost effective
- Powerful bass
- 8 inch Powered Subwoofer
- Frequency Response 35Hz – 120Hz
- BassPro Micro Subwoofer enclosure
Cons
- Weak bass
Buying guide For the Best SQ Subwoofers
Buying SQ subwoofers can get complicated because of the numerous options available.
Hence we have included an in-depth buying guide to help you choose the best Sq subwoofers.
Power and sound
This will determine any aspects of the overall sound. The more robust it is, the louder and deeper the bass would be in most situations, but not all.
Go for the massive, robust subwoofers if you want a sound that will move trucks out of the way.
Moreover, you’ll need less power if all you want is anything to boost the bass of your car stereo.
Finally, excessive volume claims should not be taken seriously. It is the RMS rating that you should pay attention to.
Active vs Passive
An external amplifier operates a driver in passive subwoofers. They typically have passive crossovers on the inside.
A dedicated subwoofer amplifier is integrated into the active ones.
Overall, which one you choose is a matter of personal preference. It also depends on what kind of device you have.
However, if you don’t want to purchase an external amplifier, an active speaker is a better option.
Speaker size
The most popular subwoofers in cars are 10″ or 12″ in size.
Moreover, there’s no need to go any more significant than this. We have discovered that there isn’t much of a difference between the sizes.
Besides, It’s more important to think about how many peaks and RMS power they produce.
When deciding on the size of your speaker system, it’s essential to consider the size of your vehicle.
Frequency
It’s always a good idea to have a broader frequency spectrum.
Moreover, It exemplifies sound quality and promise on both ends of the spectrum.
With a wider range, it should produce both the tops and bottoms of the bass sound.
Ending Thoughts On The Best SQ Subwoofers
This post includes some of the best sq subwoofers along with a buying guide. After testing numerous subwoofers, we found these 9 to be the best Sq subwoofers.
As per our evaluation, we found the Alpine Type R 12 to be the best sq subwoofer.
Let us know your views about the best sq subwoofers in the comment section.
Check our recent content on speakers, soundbars, headphones and earphones.